INSTRUMENTS AND EQUIPMENT
Anish Particle Coater Granulator – Combo
Key Features
- Bottom spray model with combination of top spray
- Conical series – combo with twin partition – recommended for aqueous and solvent base formulations and more efficient for MUPS and pellets less than 300 micron
- 2 bar / 12 bar pressure shock resistant construction
- SCADA with 21 CFR part-11 compliance
- Available in 1 litre to 1100 litre capacity
- FLP / Atex-proof instrumentation and compliance available
Benchtop Water Quality Meters – LAQUA PH1100
- Automatic pH calibration up to 5 points using USA or NIST buffers
- Switchable pH resolutions – 0.1, 0.01 pH
- Offset and slope display
- Automatic / Manual temperature compensation and temperature calibration function
- Auto-Hold / Auto-Stable measurement
- Built-in memory can store up to 500 data
- Custom black and white static LCD
- RS232 output for connecting to a GLP/GMP compatible printer or computer
DRK101A Tensile Test Machine- Touch Screen
- Measurement of paper tension, tensile strength, elongation, breaking length, tensile energy absorption, tensile index, tensile energy absorption index, especially can sense micrometer small value, unique determination of the corresponding parameters of toilet paper (including wet strength)ability.
DRK109A Touch-Screen Bursting Strength Tester
- DRK109 touch-screen Cardbard bursting strength tester, an international general Mullen instrument , is basic instrument for measuring the strength of paper and board. This instrument being simple to operate, with reliable quality and advanced technology is the ideal instrument of scientific research units, paper manufacturers, packaging industry, quality inspection departments
DRK113A Crush Tester for paper
- Ring Crush Test (RCT) for paper, thickness of 0.15～1.00 mm
- Edge Crush Test (ECT) for cardboard.
- Flat Press Test (FCT) for cardboard
- Adhesive Strength Test (PAT) for cardboard.
- Tube Compress Test (CMT)
DRK116 Beating Pulp Tester
Applying in testing filter ability of suspending pulp liquid, that is to say the determination of the beating degree.
DRK127A Coefficient of Friction Tester
Applications:
- It is applicable in static and kinetic coefficient of friction (COF) tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips / belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, etc.
DRK133 Heat Seal Tester Machine
DRK133 Heat Seal Tester seals the specimen to determine the seal parameters of basic film, laminated films, coating paper and other heat sealing laminated films according to the requirement of relative standards.
DRK134 Leak Tester Machine
Applications:
Seal property test, leakage test, package completeness test, micro-leakage test, CO2 leak detection of bags, blister packaging, bottle, etc.
E-val Pro Probe SSA-TF Thermocouple Sensor
The SSA-TF thermocouple sensor has a temperature range of -50 to +135 °C, with an unmatched accuracy of < 0.2 °C (calibrated ± 0.05 °C) , and a USB plug that saves calibration constants. The thermocouple is used with the Thermal Validation System, E-Val™ Pro, and is especially ideal for food applications and sterilization within pharmaceutical applications.
Ellab EvalPro Wired Thermocouple System
The E-Val Pro thermocouple system for thermal validation is immensely easy to handle within controlled environments due to its compact size and light weight. The thermocouple system complies with FDA regulations as well and GAMP guidelines and is designed to be the ideal solution for any thermal validation process.
The secure and password protected module can handle up to 40 thermocouples and the large internal memory is capable of holding up to 10 studies at a time. The wired thermocouple system has a built-in 8-hour battery and can be used as a stand-alone unit or be connected to a PC via LAN/USB.
The E-Val Pro is equipped with interchangeable sensor arrays, which can easily be removed for service and calibration. With 4 and 12-channel arrays available, the E-Val Pro can handle all thermocouple types as well as analog and digital inputs.
Ellab Small (Micro and Mini ) Data Loggers for Internal Mounting
TrackSense® Pro Mini and Pro Micro
- Designed for applications with limited room
- Ideal for measuring inside containers
- Diameter down to 15 mm
- Can measure temperature and pressure
Ellab Temperature and Pressure Indicator
+ Monitoring your autoclave or retort in real-time has never been so easy. This flexible solution monitors temperature or pressure with indicator and recorder options. The ETI devices clearly display and document processes to provide quick and useful overviews.
Ellab TrackSense Pro Wireless Data Logger
The TrackSense® wireless data loggers are the most complete validation solution available today. With a wide range of measuring parameters, Ellab’s data loggers are ideal for most applications.
TrackSense® Pro – Wireless Data Logger
- Interchangeable sensor option
- Many types of sensors availble
- Various parameters available
- Real-time data option
- Temperature range from -50 to +150°C
Eval Pro Probe SSA-TS Thermocouple Sensor
- The SSA-TS type T thermocouple sensor has a temperature range of -20 to +135 °C, with an unmatched accuracy of < 0.2 °C (calibrated ± 0.05 °C), and a USB plug that saves calibration constants.
- The SSA-TS thermocouple sensor is especially ideal for food applications involving retort sterilization and pasteurization. The SSA-TS functions with the Thermal Validation System E-Val™ Pro.
LAQUA PC1100 Benchtop pH Meter – Water Quality Meters
- Dual channel / display
- Automatic pH calibration up to 5 points using NIST, USA, or Custom pH buffers
- Switchable pH resolution – 0.1, 0.01, 0.001 pH
- Offset and slope display
- Automatic / Manual temperature compensation and temperature calibration function
- Automatic and manual conductivity calibration up to 4 points
- Adjustable reference temperature and temperature coefficient
- Selectable cell constant and measurement unit
- Conductivity and total dissolved solids (TDS) conversion
- Four (4) TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaCl
- Two (2) salinity calibration curves: NaCl, Seawater
- Auto log data; Built-in memory can store up to 1000 data
- Real-time clock and date / time stamp
- Auto shut-off (programmable: 1 to 30 minutes)
- Auto-Hold / Auto-Stable measurement
- Calibration alarm (programmable: 1 to 400 days)
- Custom black and white static LCD
- RS232 and USB output for connecting to computer or printer
- Security (password setting)
LAQUA PH1200 Benchtop pH meter – Water Quality Meters
- Automatic pH calibration up to 5 points using USA, NIST, or Custom buffers
- Switchable pH resolutions – 0.1, 0.01, 0.001 pH
- Offset and slope display
- Automatic / Manual temperature compensation and temperature calibration function
- Auto-Hold / Auto-Stable measurement
- Auto log data; Built-in memory can store up to 999 data
- Real-time clock and date / time stamping
- Auto shut-off (programmable: 1 to 30 minutes)
- Calibration alarm (programmable: 1 to 400 days)
- Custom black and white static LCD
- RS232 and USB outputs for connecting to a GLP/GMP compatible printer or computer
- Security (password setting)
LAQUA PH1300 Benchtop pH Meter – Water Quality Meters
- Automatic pH calibration up to 5 points using USA, NIST, or Custom buffers
- Switchable pH resolutions – 0.1, 0.01, 0.001 pH
- Offset and slope display
- Ion calibration up to 5 points
- Automatic / Manual temperature compensation and temperature calibration function
- Auto-Hold / Auto-Stable measurement
- Auto log data; Built-in memory can store up to 999 data
- Real-time clock and date / time stamping
- Auto shut-off (programmable: 1 to 30 minutes)
- Calibration alarm (programmable: 1 to 400 days)
- Custom black and white static LCD
- RS232 and USB outputs for connecting to a GLP/GMP compatible printer or computer
- Security (password setting)
LAQUAact EC110 Handheld Conductivity/TDS/Res/Temp Meter
LAQUAact EC110 Handheld Conductivity/TDS/Res/Temp Meter Model: EC110 Horiba – Japan Features: Automatic and manual conductivity calibration up to 4 points Adjustable reference temperature and temperature coefficient Selectable cell constant and measurement unit Automatic / Manual temperature compensation and temperature calibration function Conductivity and total dissolved solids (TDS) conversion Four (4) TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaCl Built-in memory can store up to 100 data Auto shut-off (programmable: 1 to 30 minutes) Auto-Hold / Auto-Stable measurement Large LCD: 52mm x 64mm Powered by 2 x AAA batteries (LR03) or Ni-MH rechargeable batteries or power adaptor Casing is IP67 waterproof (for 30mins immersion in 1m depth of water) and dustproof Packaged in new molded carry …
LAQUAact EC120 Handheld Conductivity/TDS/Res/Sal/Temp Meter
- Automatic and manual conductivity calibration up to 4 points
- Adjustable reference temperature and temperature coefficient
- Selectable cell constant and measurement unit
- Automatic / Manual temperature compensation and temperature calibration function
- Conductivity and total dissolved solids (TDS) conversion
- Four (4) TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaCl
- Two (2) salinity calibration curves: NaCl, Seawater
- Auto log data; Built-in memory can store up to 1000 data
- Auto shut-off (programmble: 1 to 30 minutes)
- Real-time clock and date / time stamping
- Auto-Hold / Auto-Stable measurement
- Large backlit LCD: 52mm x 64mm
- RS232 output for connecting the meter to a computer or printer
LAQUAact PH110 Handheld pH/ORP/Temp Meter
- Automatic pH calibration up to 5 points using NIST or USA pH buffers
- 0.01 pH resolution
- Offset and slope display
- Automatic / Manual temperature compensation and temperature calibration function
- Built-in memory can store up to 100 data
- Auto-shut off (programmable: 1 to 30 minutes)
- Auto-Hold / Auto-Stable measurement
- Built-in electrode holder allows 2 electrodes to be attached on both sides of the meter
- Large LCD: 52mm x 64mm
- Casing is IP67 waterproof (for 30mins immersion in 1m depth of water) and dustproof
- Powered by 2 x AAA (LR03) or Ni-MH rechargeable batteries or power adaptor
LAQUAact PH120 Handheld pH/ORP/Temp Meter
- Automatic pH calibration up to 5 points using NIST, USA or Custom pH buffers
- 0.01 pH resolution
- Offset and slope display
- Automatic / Manual temperature compensation and temperature calibration function
- Auto log data; Built-in memory can store up to 1000 data
- Auto-shut off (programmable: 1 to 30 minutes)
- Auto-Hold / Auto-Stable measurement
LAQUAtwin Ca-11 Calcium Meter – Pocket Water Quality Meters
- Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)
- Up to 2 calibration points
- Auto standard recognition: 150 & 2000ppm calcium (default)
- Changeable high and low calibration values
- Multiplication compensation: 0.01 to 9.90
- Temperature and mV display
- Temperature calibration: 5 to 40.0 ºC
- Auto hold / auto stable measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40 ºC, 85% or less relative humidity
LAQUAtwin EC-11 Pocket Conductivity Meter
- Auto Range
- Auto Calibration
- Auto Standard Recognition
- Auto Temperature Compensation (2%/°C fixed)
- Temperature Calibration (only for EC-22 & EC-33)
- Auto Stable / Auto Hold Measurement
- Auto Power Off (30mins)
- Switchable Backlight
- Low Battery Indicator
- IP67 Dust / Waterproof
- Replaceable Sensor
FOCUS SUPPLIERS
