HORIBA provides a wide range of water quality analyzers including:
- pH, Resistivity, Conductivity and Salinity meters
- Oxidation-Reduction Potential [ORP] meters
- Total Dissolved Solids and Dissolved Oxygen meters
- Ion meters
- Colored Dissolved Organic matters spectrofluorometer
These instruments are used over a broad range of industries such as:
- Drinking water for the investigation of colored dissolved organics matters
- Environmental water for physical indicators such as conductivity, total suspended solids, for chemical indicators pH, dissolved oxygen,
- Industrial water for dissolved minerals such Calcium ions and salt measurements
New
Benchtop Water Quality Meters – LAQUA PH1100
- Automatic pH calibration up to 5 points using USA or NIST buffers
- Switchable pH resolutions – 0.1, 0.01 pH
- Offset and slope display
- Automatic / Manual temperature compensation and temperature calibration function
- Auto-Hold / Auto-Stable measurement
- Built-in memory can store up to 500 data
- Custom black and white static LCD
- RS232 output for connecting to a GLP/GMP compatible printer or computer
New
LAQUA PC1100 Benchtop pH Meter – Water Quality Meters
- Dual channel / display
- Automatic pH calibration up to 5 points using NIST, USA, or Custom pH buffers
- Switchable pH resolution – 0.1, 0.01, 0.001 pH
- Offset and slope display
- Automatic / Manual temperature compensation and temperature calibration function
- Automatic and manual conductivity calibration up to 4 points
- Adjustable reference temperature and temperature coefficient
- Selectable cell constant and measurement unit
- Conductivity and total dissolved solids (TDS) conversion
- Four (4) TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaCl
- Two (2) salinity calibration curves: NaCl, Seawater
- Auto log data; Built-in memory can store up to 1000 data
- Real-time clock and date / time stamp
- Auto shut-off (programmable: 1 to 30 minutes)
- Auto-Hold / Auto-Stable measurement
- Calibration alarm (programmable: 1 to 400 days)
- Custom black and white static LCD
- RS232 and USB output for connecting to computer or printer
- Security (password setting)
New
LAQUA PH1200 Benchtop pH meter – Water Quality Meters
- Automatic pH calibration up to 5 points using USA, NIST, or Custom buffers
- Switchable pH resolutions – 0.1, 0.01, 0.001 pH
- Offset and slope display
- Automatic / Manual temperature compensation and temperature calibration function
- Auto-Hold / Auto-Stable measurement
- Auto log data; Built-in memory can store up to 999 data
- Real-time clock and date / time stamping
- Auto shut-off (programmable: 1 to 30 minutes)
- Calibration alarm (programmable: 1 to 400 days)
- Custom black and white static LCD
- RS232 and USB outputs for connecting to a GLP/GMP compatible printer or computer
- Security (password setting)
New
LAQUA PH1300 Benchtop pH Meter – Water Quality Meters
- Automatic pH calibration up to 5 points using USA, NIST, or Custom buffers
- Switchable pH resolutions – 0.1, 0.01, 0.001 pH
- Offset and slope display
- Ion calibration up to 5 points
- Automatic / Manual temperature compensation and temperature calibration function
- Auto-Hold / Auto-Stable measurement
- Auto log data; Built-in memory can store up to 999 data
- Real-time clock and date / time stamping
- Auto shut-off (programmable: 1 to 30 minutes)
- Calibration alarm (programmable: 1 to 400 days)
- Custom black and white static LCD
- RS232 and USB outputs for connecting to a GLP/GMP compatible printer or computer
- Security (password setting)
New
LAQUAact EC110 Handheld Conductivity/TDS/Res/Temp Meter
LAQUAact EC110 Handheld Conductivity/TDS/Res/Temp Meter Model: EC110 Horiba – Japan Features: Automatic and manual conductivity calibration up to 4 points Adjustable reference temperature and temperature coefficient Selectable cell constant and measurement unit Automatic / Manual temperature compensation and temperature calibration function Conductivity and total dissolved solids (TDS) conversion Four (4) TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaCl Built-in memory …
New
LAQUAact EC120 Handheld Conductivity/TDS/Res/Sal/Temp Meter
- Automatic and manual conductivity calibration up to 4 points
- Adjustable reference temperature and temperature coefficient
- Selectable cell constant and measurement unit
- Automatic / Manual temperature compensation and temperature calibration function
- Conductivity and total dissolved solids (TDS) conversion
- Four (4) TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaCl
- Two (2) salinity calibration curves: NaCl, Seawater
- Auto log data; Built-in memory can store up to 1000 data
- Auto shut-off (programmble: 1 to 30 minutes)
- Real-time clock and date / time stamping
- Auto-Hold / Auto-Stable measurement
- Large backlit LCD: 52mm x 64mm
- RS232 output for connecting the meter to a computer or printer
New
LAQUAact PH110 Handheld pH/ORP/Temp Meter
- Automatic pH calibration up to 5 points using NIST or USA pH buffers
- 0.01 pH resolution
- Offset and slope display
- Automatic / Manual temperature compensation and temperature calibration function
- Built-in memory can store up to 100 data
- Auto-shut off (programmable: 1 to 30 minutes)
- Auto-Hold / Auto-Stable measurement
- Built-in electrode holder allows 2 electrodes to be attached on both sides of the meter
- Large LCD: 52mm x 64mm
- Casing is IP67 waterproof (for 30mins immersion in 1m depth of water) and dustproof
- Powered by 2 x AAA (LR03) or Ni-MH rechargeable batteries or power adaptor
New
LAQUAact PH120 Handheld pH/ORP/Temp Meter
- Automatic pH calibration up to 5 points using NIST, USA or Custom pH buffers
- 0.01 pH resolution
- Offset and slope display
- Automatic / Manual temperature compensation and temperature calibration function
- Auto log data; Built-in memory can store up to 1000 data
- Auto-shut off (programmable: 1 to 30 minutes)
- Auto-Hold / Auto-Stable measurement
New
LAQUAtwin Ca-11 Calcium Meter – Pocket Water Quality Meters
- Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)
- Up to 2 calibration points
- Auto standard recognition: 150 & 2000ppm calcium (default)
- Changeable high and low calibration values
- Multiplication compensation: 0.01 to 9.90
- Temperature and mV display
- Temperature calibration: 5 to 40.0 ºC
- Auto hold / auto stable measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40 ºC, 85% or less relative humidity
New
LAQUAtwin EC-11 Pocket Conductivity Meter
- Auto Range
- Auto Calibration
- Auto Standard Recognition
- Auto Temperature Compensation (2%/°C fixed)
- Temperature Calibration (only for EC-22 & EC-33)
- Auto Stable / Auto Hold Measurement
- Auto Power Off (30mins)
- Switchable Backlight
- Low Battery Indicator
- IP67 Dust / Waterproof
- Replaceable Sensor
New
LAQUAtwin K-11 Potassium Meter – Pocket Water Quality Meters
- Auto Standard Recognition
- Changeable High and Low Calibration Values
- Multiplication Compensation
- Temperature Calibration
- Auto Hold / Auto Stable Measurement
- Switchable Backlight
- Automatic Power Off (30mins)
- Low Battery Indicator
- IP67 Dust / Waterproof
- Replaceable Sensor
New
LAQUAtwin Na-11 Sodium Meter – Pocket Water Quality Meters
- Auto Standard Recognition
- Changeable High and Low Calibration Values
- Multiplication Compensation
- Temperature Calibration
- Auto Hold / Auto Stable Measurement
- Switchable Backlight
- Automatic Power Off (30mins)
- Low Battery Indicator
- IP67 Dust/Waterproof
- Replaceable Sensor
New
LAQUAtwin NO3 nirate-nitrogen concentrations meter
- Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)
- Up to 2 calibration points
- Auto standard recognition
- Changeable high and low calibration values
- Multiplication compensation: 0.01 to 9.90
- Temperature and mV display
- Temperature calibration: 5 to 40.0 ºC
- Auto hold / auto stable measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40 ºC, 85% or less relative humidity
New
LAQUAtwin pH-11 Pocket pH Meter – Water Quality Meters
- Minimum sample volume: 0.1ml (0.05ml with sampling sheet B)
- Up to 2 calibration points
- pH and mV display
- Auto calibration
- Auto buffer recognition: USA & NIST pH buffers
- Auto temperature compensation
- Auto stable / auto hold measurement
- Auto power off: 30 mins
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
New
LAQUAtwin pH-22 Pocket pH Meter – Water Quality Meters
- Minimum sample volume: 0.1ml (0.05ml with sampling sheet B)
- Up to 3 calibration points
- pH and mV display
- Auto calibration
- Auto buffer recognition: USA & NIST pH buffers
- Auto temperature compensation
- Auto stable / auto hold measurement
- Auto power off: 30 mins
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy
- Display: custom (monochrome) LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
New
LAQUAtwin Salt-22 NaCl salt concentration – Pocket Water Quality Meters
- Auto Calibration
- Auto Standard Recognition
- Changeable High & Low Calibration Values
- Temperature Calibration
- Auto Hold / Auto Stable Measurement
- Switchable Backlight
- Automatic Power Off (30mins)
- Low Battery Indicator
- IP67 Dust / Waterproof
- Replaceable sensor
SUPPLIER LIST
