Specific Gravity Cups

  • Three sizes are offered; 50cc, 100cc and 83.3cc (US gallon), available in both high strength aluminium or stainless steel. To facilitate the use of two-pan laboratory balances counterpoise tare weights can be supplied to order.

Share this product

Compare

Description

Specific Gravity Cups

Model: 1501, 1503

Brand: Sheen Instruments – UK

1501 - 1503

  • The cups are designed for use in the Determination of Density of liquids in respect of National Standards B.S. 3900 part A19 -1998, ISO 2811 -1:1997, DIN 53217 and ASTM 1475.
  • Three sizes are offered; 50cc, 100cc and 83.3cc (US gallon), available in both high strength aluminium or stainless steel. To facilitate the use of two-pan laboratory balances counterpoise tare weights can be supplied to order.
  • The manufacturing tolerance on the closed volume is ± 0.2% over the range of 15° – 25° Centigrade.
  • Method of Use
    1./  Determine the weight of a clean cup in grams. As an alternative, the cup may be
    supplied with an accurate tare weight for use with two-pan laboratory balances.
    2./ Remove cover and fill within 2mm of brim with the material to be tested.
    3./ Carefully replace cover so that air and excess material is expelled through vent.
    4./ Wipe over cover to remove surplus and reweigh. By subtracting the original weight
    of the cup the weight of the contents will be found. If a tare weight was used at the
    start the balance will show the weight of the contents.
    5./ Clean thoroughly immediately after use.

Gravity-15031501-Cal

Ordering Information
1501
Ref. 1501/50 – 50cc Aluminium
Ref. 1501/100 – 100cc Aluminium
Ref. 1501/A – 83.3cc US Aluminium
Ref. 1501/CW – Counterpoise (tare) weight
1503
Ref. 1503/50 – 50cc Stainless Steel
Ref. 1503/100 -100cc Stainless Steel
Ref. 1503/A – 83.3cc US Stainless Steel

Reviews

There are no reviews yet.

Be the first to review “Specific Gravity Cups”