Specific Gravity Cups

Description

Specific Gravity Cups

Model: 1501, 1503

Brand: Sheen Instruments – UK

• The cups are designed for use in the Determination of Density of liquids in respect of National Standards B.S. 3900 part A19 -1998, ISO 2811 -1:1997, DIN 53217 and ASTM 1475.
• Three sizes are offered; 50cc, 100cc and 83.3cc (US gallon), available in both high strength aluminium or stainless steel. To facilitate the use of two-pan laboratory balances counterpoise tare weights can be supplied to order.
• The manufacturing tolerance on the closed volume is ± 0.2% over the range of 15° – 25° Centigrade.
• Method of Use
  1./  Determine the weight of a clean cup in grams. As an alternative, the cup may be
  supplied with an accurate tare weight for use with two-pan laboratory balances.
  2./ Remove cover and fill within 2mm of brim with the material to be tested.
  3./ Carefully replace cover so that air and excess material is expelled through vent.
  4./ Wipe over cover to remove surplus and reweigh. By subtracting the original weight
  of the cup the weight of the contents will be found. If a tare weight was used at the
  start the balance will show the weight of the contents.
  5./ Clean thoroughly immediately after use.

Ordering Information
1501
Ref. 1501/50 – 50cc Aluminium
Ref. 1501/100 – 100cc Aluminium
Ref. 1501/A – 83.3cc US Aluminium
Ref. 1501/CW – Counterpoise (tare) weight
1503
Ref. 1503/50 – 50cc Stainless Steel
Ref. 1503/100 -100cc Stainless Steel
Ref. 1503/A – 83.3cc US Stainless Steel